Xenon bulbs
DANGER
Xenon bulbs carry a high voltage. You can get an electric shock if you remove the cover of the Xenon bulb and touch the electrical contacts. There is a risk of fatal injury.
Never touch the parts or the electrical contacts of the Xenon bulb. Always have work on the Xenon bulbs carried out at a qualified specialist workshop.
If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the engine. For this to be observed, the lights must be switched on before starting the engine.
Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times.
Have the headlamp setting checked regularly.
Other bulbs
WARNING
Bulbs, lamps and connectors can get very hot when operating. If you change a bulb, you could burn yourself on these components.
There is a risk of injury.
Allow these components to cool down before changing a bulb.
There are bulbs other than the Xenon bulbs that you cannot replace. Replace only the bulbs listed . Have the bulbs that you cannot replace yourself changed at a qualified specialist workshop.
If you require assistance changing bulbs, consult a qualified specialist workshop.
Do not touch the glass tube of new bulbs with your bare hands. Even minor contamination can burn into the glass surface and reduce the service life of the bulbs. Always use a lintfree cloth or only touch the base of the bulb when installing.
Only use bulbs of the correct type.
If the new bulb still does not light up, consult a qualified specialist workshop.
Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times.
Have the headlamp setting checked regularly.
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb type can be found in the legend.
Halogen headlamps
1 Low-beam headlamp: H7 55 W 2 High-beam headlamp: H7 55 W
Tail lamp
1 Brake lamp: P 21 W-L
Setting the center air vents
1 Center air vent, left
2 Center air vent, right
3 Center vent thumbwheel, right
4 Center vent thumbwheel, left
■ To open/close: turn thumbwheels 3
and 4 to the right or left. ...
Driving
Important safety notes
WARNING
Make sure absolutely no objects are
obstructing the pedals' range of movement.
Keep the driver's footwell clear of all
obstacles. If there are any floormats or
ca ...
Activating/deactivating MAX COOL
maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
► To activate: press the Ù button.
The indicator lamp ...