Displaying navigation instructions
In the Navi menu, the multifunction display shows navigation instructions.
For more information, see the separate operating instructions.
■ Switch on the audio system with Becker® MAP PILOT or COMAND; see the separate operating instructions.
■ Press the or
button on the
steering wheel to select the Navi menu.
Route guidance not active
1 Direction of travel 2 Current street
Route guidance active
No change of direction announced
1 Distance to the destination
2 Distance to the next change of direction
3 Current street
4 Symbol "follow the road's course"
Change of direction announced without a lane recommendation
1 Road into which the change of direction
leads
2 Distance to change of direction and visual
distance display
3 Change-of-direction icon
When a change of direction has been announced, you will see visual distance display 2 next to the symbol for change of direction 3. This shortens from the bottom to the top of the display as you approach the point of the announced change of direction.
Change of direction announced with a lane recommendation
1 Road into which the change of direction
leads
2 Distance to change of direction and visual
distance display
3 Lane recommendation
4 New lane during a change of direction
5 Uninterrupted lane
6 Change-of-direction icon
On multilane roads, the system can display lane recommendation 3 for the next change of direction. During the change of direction, additional lanes may be displayed.
Lane recommendations are only displayed if the relevant data is available on the digital map.
Other status indicators of the navigation system
• : you have reached the
destination or an
intermediate destination.
• New Route... or Calculating Route:
calculating a new route
• Off Map or Off Mapped Road: the vehicle
position is outside the area of the digital
map (off-map position).
• No Route: no route could be calculated to the selected destination.
Towing in the event of malfunctions
General not
If you are removing the propeller shaft,
use M10 nuts as spacers on the M8 bolts
and secure them with M8 nuts.
New self-locking nuts must be used when
the propeller shafts are refit ...
Garage door opener
Important safety notes
WARNING
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent
...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
...