Important safety notes
WARNING
If children are left unsupervised in the vehicle,
they could:
• open the doors, thus endangering other
people or road users.
• get out and disrupt traffic.
• operate the vehicle's equipment.
Additionally, children could set the vehicle in motion if, for example, they: • release the parking brake.
• shift the automatic transmission out of parking position P.
• starting the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the SmartKey with you and lock the vehicle. Never leave children or animals unattended in the vehicle. Always keep the SmartKey out of reach of children.
WARNING
Combustion engines emit poisonous exhaust gases such as carbon monoxide. Inhaling these exhaust gases leads to poisoning. There is a risk of fatal injury. Therefore never leave the engine running in enclosed spaces without sufficient ventilation.
Vehicles with a gasoline engine
: the catalytic converter is preheated for up to 30 seconds after a cold start. The sound of the engine may change during this time.
Automatic transmission
■ Shift the transmission to position P .
The transmission position display in the multifunction display shows P .
You can also start the engine when the transmission is in position N.
Starting procedure with the SmartKey
■ To start a gasoline engine: turn the SmartKey to position 3 in the ignition lock and release it as soon as the engine is running.
■ To start a diesel engine: turn the SmartKey to position 2 in the ignition lock .
The preglow indicator lamp in the
instrument cluster lights up.
■ When the
preglow indicator lamp goes out, turn the SmartKey to position 3 and release it as soon as the
engine is running.
You can start the engine without preglow if the engine is warm.
Using KEYLESS-GO to start the engine
■ Depress the brake pedal and keep it depressed.
■ To start a gasoline engine: press the Start/Stop button once.
The engine starts.
■ To start a diesel engine: press the Start/ Stop button once.
Preglow is activated and the engine starts.
The Start/Stop button can be used to start the vehicle without inserting the SmartKey into the ignition lock. The Start/ Stop button must be inserted in the ignition lock and the SmartKey must be in the vehicle.
Changing a wheel
Flat tire
The "Breakdown assistance" section contains information and notes
on how to deal with a flat tire. ...
SmartKey positions
0 To remove the SmartKey
1 Power supply for some consumers, such
as the windshield wipers
2 Ignition (power supply for all consumers)
and drive position
3 To start the engine
As soon as the ig ...
Setting the air vents
Important safety notes
WARNING
When operating the climate control, the air
that enters the passenger compartment
through the air vents can be very hot or very
cold (depending on the set temperat ...